Wipperman Chain Tools

0/5 (0 Reviews)
MSRP : $29.95

Product Description

Trust the best chain maker to produce the best chain tool! handles all makes/models of chains, including the new 10 speed types.

   No Reviews Found.

Chain wrap capacity 2 teeth too small... real problem?

I'm looking to replace my rear derailleur on my 'cross bike with clutch type derailleur, a SRAM X7 to be specific. I use this as kind of a do-it-all for now, meaning it get's used for gravel, 'cross, and road racing. I have a compact chainset and run either a 12-25 or a 12-32 cassette depending on t ... Read More »

Ultegra 6800 shfiters and derailleurs but with 10-speed cassette and chain?

Hi, all I'm hoping someone has a definitive answer/experience on using Ultegra 6800 shifters and derailleurs with a 10-speed cassette + chain + wheel/hub. Looking at some earlier discussions: [list] [*]mpcbike [URL="http://forums.roadbikereview.com/components-wrenching/ultegra-6800-shifters- ... Read More »

38 tooth chain ring

Has anyone replaced the 39 tooth chainring with a 38 tooth ring? Was the front shifting degraded? The difference between 53/38 is less than 50/34 so I'm guessing shifting should be good but just wanted to be sure. I have a sram standard crank and would be using a sram 38 chainring, thanks.Read More »

Is this normal (chain so close to frame)?

Hey guys, So I just had my CX bike (Pivot Vault) upgraded to the Ultegra Di2 groupset. I took it out for a ride, and it rides awesome...Came back home and was wiping it down and notice that when the chain is in a small ring, it's against the frame. Not sure if this is normal or did the LBS miss ... Read More »

Campy Record 10 Speed and Super Record 11 Speed Front Chain Ring and Crank Arm

I currently have a 53/39T with 170mm arm Record 10 Speed. Would I have shifting issues if I replaced it with a 50/34T with 170mm Super Record 11 Speed crank? ThanksRead More »

Read More »



RoadbikeReview on Facebook