Scott CX Cyclocross Bike

5/5 (1 Reviews)
MSRP : $2012.00

Product Description

  • Frame: Scott Cyclocross frame 7005 alloy
  • Fork: Scott Carbon CX straight, alloy steerer
  • Shifters: Shimano ST-6600 10 speed
  • Crankset: Truvativ Elita CX C2.2 34x48 T
  • Spokes: DT Swiss 1.8mm blk

Review Options:  Sorted by Latest Review | Sort by Best Rating

Reviews 1 - 1 (1 Reviews Total)

User Reviews

Overall Rating:5
Value Rating:5
Submitted by TeamBeast a Recreational Rider

Date Reviewed: June 21, 2009

Strengths:    Light, super stiff, snazzy paint. Climbs like a goat. Mine has handled beatings and come back for more. Raced to success.

Weaknesses:    Top tube material dented slightly. But the wide flat area is SO nice for dismounts, it is worth the susceptible shape.

Bottom Line:   
Strong and stiff frame! It came with a good group, but single-ated it and haven't looked back. The stout rear triangle never drops my chain or twists, even on the steeps or pulling out of sharp turn. The frame handles 38s and the fork handles 44s, so running it like a 29er is a ton of fun. Corners fast for a cross bike, tight geometry overall.

Expand full review >>

Favorite Ride:   SF Flow

Price Paid:    $1100.00

Purchased At:   City Cycle SF

Similar Products Used:   Cross Check (heavy), Tricross (not-bad, really similar extrawide forks)

Bike Setup:   King SS hubs, Stans tubeless rims/Raven tires, Durace crank with 39t ring, Surly 17 cog, SRAM Rival brake levers, SLR saddle, Ritchey Biomax bar, Ritchey comp stem and post, Crank Bros smarty pedals

Reviews 1 - 1 (1 Reviews Total)

Review Options:  Sorted by Latest Review | Sort by Best Rating

Beadless MTB rims for tubeless CX?

Cross-posted over at mtbr, but rbr cx page seems to get a bit more traffic. Anyway: Has anyone here had much success with using a beadless MTB rim as a tubeless setup for their cross bike? I've had pretty great luck with Stans Alpha 400 rims and Vittoria TNT tires, but that was after a bit of ... Read More »

Park Tension Tool conversion chart and Sapim CX-Rays question

Well I'm elbows deep in my first wheel build. I got the 18:9 Pacenti wheelset that Mike T posted about in another thread except with Sapim CX-Ray spokes. I have to say thanks to Mike for all the tips on your site they are helping ALOT. Anyway, at this point, I'm in the process of bringing up the t ... Read More »

SuperX CX-1

I pre-ordered a new CX-1 build SuperX... Cannondale keeps pushing out the delivery date. Just curious if anyone else have received theirs or if you are seeing the same. I'm sure the cause is SRAM's backing on the CX-1 groupe. I've got a new set of tubular discs built up just waiting for it...Read More »

Single narrow / wide chainrings - performance in the mud for CX

What is everyone's thoughts on using single narrow / wide chainrings in muddy CX race conditions (vs. a standard single chainring with bashguard)? I like the idea of narrow / wide chainrings in dry conditions, because it is much harder to drop a chain (if you bang the rear wheel on a barrier or the ... Read More »

Open tubular CX clinchers with latex tubes; vs tubular tires for cyclocross

What do you guys think about "open tubular" clinchers with latex tubes (for CX); vs tubulars. The Challenge versions have a very similar high TPI cotton casing (like the tubular versions). I can run fairly low pressures (on my Challenge Grifo "open tubular" clinchers) with the latex tubes, but sin ... Read More »

Read More »



Interbike Featured Booths

Check out the hottest road bike products from these brands!

See All Interbike Coverage - Click Here »


RoadbikeReview on Facebook