DT Swiss 240s Front Hub Hubs

5/5 (4 Reviews)
MSRP : $314.00


Product Description

The DT Swiss 240S hub is the benchmark for high end hubs. These Swiss made hubs have stainless steel bearings in steel races for longevity and low rolling resistance. If you are looking to build a new set of wheels, then use the DT Swiss 24...


Review Options:  Sorted by Latest Review | Sort by Best Rating

Reviews 1 - 4 (4 Reviews Total)

User Reviews

Overall Rating:5
Value Rating:5
Submitted by DRX a Road Racer

Date Reviewed: October 17, 2011

Strengths:    Long lasting, smooth, durable, easy & cheap maintenance when needed.

Weaknesses:    No straight pull option at this time.

Bottom Line:   
Best (or one of the best) hubs available. I put 50,000+ miles on my front wheel before putting it out of its misery and selling the hub separately. The hub still spun smooth. Bearings cost $5 and takes 5 minutes to replace with no special tools. Not flashy and maybe a little old school but you can't beat it.

Expand full review >>

Favorite Ride:   Bakery Loop

Purchased At:   NA

Similar Products Used:   Lots



Overall Rating:5
Value Rating:5
Submitted by Elias a Road Racer

Date Reviewed: November 16, 2009

Strengths:    DT Swiss has an awesome reputation when it comes to bearings and hubs. Good luck finding anything real negative other than those who nit pick everything.

Weaknesses:    None. Maybe price. However, they are DT Swiss hubs.

Bottom Line:   
I had a custom wheelset built buy wheelbuilder.com and bought the DT Swiss 240 hubs. I read numerous reviews on the hubs and every person I spoke with at the LBS loved those hubs. I was trying to find something wrong with them but had no luck. Those hubs have a great reputation bor being bullet proof.

Expand full review >>

Favorite Ride:   Lake DeValle

Purchased At:   wheelbuilder.com

Similar Products Used:   Chris King, Mavic

Bike Setup:   Specialized Tarmac, Dura Ace components, Velocity rims with DT Swiss Aerolite spokes.


Overall Rating:5
Value Rating:4
Submitted by voodooguy a Recreational Rider

Date Reviewed: May 8, 2009

Strengths:    Roll nice and smooth

Weaknesses:    None so far

Bottom Line:   
Spins great, can tell the difference from the stock hub; Like the sound of the rear hub; so far so good!

Expand full review >>

Favorite Ride:   That a way

Purchased At:   Bicycle Wheel Wareho

Similar Products Used:   Shimano 561

Bike Setup:   Scattante CFR Race; Ultegra; Thomson stem and post; DT Swiss 1.2 w/ comp spokes


Overall Rating:5
Value Rating:4
Submitted by hfc a Road Racer

Date Reviewed: February 29, 2008

Strengths:    Light and reliable.

Weaknesses:    Pretty expensive if you buy new. There are plenty of excellent hubsets around that cost less. I hear that you need special tools to take the hubs apart if you want to do any home maintenance.

Bottom Line:   
I bought these lightly used laced to a set of Velocity Aerohead rims. To date I've put about 2000 miles on these hubs and haven't had a single problem. I recently had to replace the front rim after running over a rock and a close check of the hub shows it spinning smooth and like new. Very happy with these hubs.

Expand full review >>

Favorite Ride:   downhill

Similar Products Used:   Velomax, Ultegra hubs, Mavic Helium

Bike Setup:   Colnago E1, Campy Record



Reviews 1 - 4 (4 Reviews Total)

Review Options:  Sorted by Latest Review | Sort by Best Rating


Question about DT Swiss 240S Radial Front Hub

I'm building up some CX wheels and was going to do a 28-hole 2x cross for the front using a DT Swiss 240S hub. The only hubs I can find are there radial specific front hubs. I know these differ in the flange to take the stresses of radial lacing, but would it be OK to use them for regular 2X lacin ... Read More »

Read More »



INTERBIKE

Contest




Videos

Interbike Featured Booths

Check out the hottest road bike products from these brands!



















See All Interbike Coverage - Click Here »

 

RoadbikeReview on Facebook