Review Options:
Sorted by Latest Review | Sort by Best Rating |
|
Reviews 1 - 4 (4 Reviews Total)
| |
User Reviews
Overall Rating:
Value Rating:
Submitted by
tdot
a Recreational Rider
from Date Reviewed: December 26, 2009
Strengths: Pretty strong rims despite low spoke count. Look good. Fairly light.Weaknesses: Bearing quality is not up to snuff. I abused my old Shimano Ultegrawheels and the bearings never required new cones but these ones get pitted after a few thousand km. The cones are not machined and are of low quality material.Bottom Line: These came original with my 2006 Giant TCR C3. They are still true after about 7000 km but I am on my second rear wheel bearing rebuild kit.
Favorite Ride: Ridge road Barrie
Price Paid:
$100.00
Purchased At: Came with bike
Similar Products Used: Shimano
Overall Rating: Value Rating:
Submitted by
wccc bike rider
a Recreational Rider
from Date Reviewed: September 11, 2009
Strengths: Looks, fairly light compared to Mavic Open Pro'sWeaknesses: Cheesy graphics, poor material quality led to a potentially catastrophic failure.Bottom Line: These wheels were OE on the 2006 Giant TCR C3 so I decided to save some money and buy better pedals/shoes-bad decision. I should have upgraded the wheelset first.
I am a heavy rider (225) so I had reservations about riding on a 24 spoked rear wheel after coming from a Mavic Open Pro (32 spoke). Sure, there was a noticeable difference in ride quality-particularly plushness. But shortly after I started riding with the XERO's, I had to take the rear wheel in to have it trued.
I needed to repack the rear bearing with grease because it sounding like someone through walnuts into a blender. After that the hub kept coming loose. Two weeks ago, while on a 64 mile ride, two of the spokes pulled through the rim while climbing a hill. I was stranded and had to call the SAG wagon to get me. Upon further inspection I noticed the entire rim cracked on the hub side indicating a structural failure. Thankfully I was not bombing down a hill when this occurred.
Favorite Ride: Road
Purchased At: with the bike
Similar Products Used: Mavic Open Pro
Bike Setup: Giant TCR C3, Shimano 105/Ultegra mix, Michelin tires
Overall Rating:
Value Rating:
Submitted by
Terry Fielder
a Recreational Rider
from Date Reviewed: March 3, 2009
Strengths: Very light especially at the price of these wheels. No spoke, rim or bearing problems after over 5,000 kms.Weaknesses: none so farBottom Line: Three years ago, I bought my wife an inexpensive road bike to try to get her back into road riding with me. She is not the type of person who cares about brands, price, quality, etc. As long as it works. Her wheels had terrible quality bearings that felt like they were filled with square bearings. So, after a few weeks of riding, I bought her some new, lighter and better wheels on e-bay. I did not tell her about the change and she did not notice the upgrade until we started riding. "What did you do to my bike?" after just 1 km. She noticed! And she loves the wheels. After 2 seasons of riding over 5,000 kms (3,000 mi), and some normal bumps and one HUGE hole that sent her flying, both wheels are still perfectly true. Bearings are smooth. She weighs about 160 lbs and rides in some triathalons where her bike segment puts her in the top 3 of her age category. Her Xeros help a lot. I bought her a new bike, a Rock Mountain Solo 50st. She wanted, so she has her Xeros on her new bike. We have 2,000km training rides planned for her Xeros as soon as the snow and ice melt to prepare for a 7,900km (5,000 mi) cross Canada supported tour for which I will fit her Mavic Ksyriums so we can save her Xeros for pleasure rides. Only maintenance was 2 bearing clean & grease jobs.
Favorite Ride: Cabot Trail Park highway loop
Price Paid:
$170.00
Purchased At: e-bay
Bike Setup: KHS Flyte 500 & total bike upgrades to some 105 but mostly Ultegra components. New bike is a Rocky Mountain Solo 50st with Columbus carbon Carve forks and rear triangle and Columbus steel front frame V. Ultegra & Durace drive, flat bars with Shimano XTR shifters.
Overall Rating:
Value Rating:
Submitted by
WestfordPete
a Recreational Rider
from Date Reviewed: July 20, 2008
Strengths: Tough wheel. spokes are still strong and rims pretty true (not counting the vice grip bending), low maintenance.Weaknesses: Rear axle is hard to adjust for bearing tension.Bottom Line: Wheels came stock on my Giant OCR-C3. IT's a good solid wheel set that has lasted me over 6500 miles. I'm not a racer, but was able to keep up in a large peloton at 24 MPH in a 175 mile bike event in Philly.
I hit a 4" concrete edge in a sunken drainage grate in Buffalo, Wy which instantly flatted my rear tire and flared out the rear rim a good 1/2 inch. Bent the rim back with some vice grips and it's been good to go. Slapped some Continental Gatorskins on them, and it's been 3,000 miles between flats since.
Favorite Ride: Hurricane Mt. Road in North Conway
Purchased At: Naults in Manchester
Bike Setup: Stock Giant OCR3 with replacement Truvative bottom bracket.
|
Reviews 1 - 4 (4 Reviews Total)
| |
Review Options:
Sorted by Latest Review | Sort by Best Rating |
