Road Bike, Cycling Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
5,480 Posts
We talking new old stock, or used? Either way, despite the hardware being sold stuff, a lot of it is 2+ generations old.

Would forget it if used. Can't imagine the point in going for that when there's more current stuff with similar spec going around used for a few hundred dollars more.
 

·
Administrator
Joined
·
13,147 Posts
nope probably 2/3's that at best
 

·
Cycling induced anoesis
Joined
·
13,019 Posts
With a couple of qualifiers such as, if it's NOS and it fits, I might be inclined to negotiate down to the $800 range. The crankset/ BB is a generation behind (unless you count BB30) as is the drivetrain (unless you count Campy 11 :)).

On the plus side, the frameset is straight E5 alu and (arguably) on of Specs best, so it might be worth pursuing.

That said, the deal breaker for me might be if it's used, thus no warranty. If it were a CF/ alu materials mix I wouldn't touch it, but with E5 alu I might take the risk.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top