[Wadl]

Hi, I just purchase a set of Campagnolo Eurus for a shimano cassette and it came with an 11s freehub.

I have SRAM Red on my bike, so obviously, a 10s cassette.

Where and which spacer should I buy to install my cassette ??

Thanks in advance guys.

 

[Wadl]

would that be it :
Shimano 11-SPEED 1.85mm Low Spacer > Components > Drivetrain > Cassettes | Jenson USA Online Bike Shop

 

[biker jk]

You need the existing 1mm space plus the 1.85mm spacer.

 

[Wadl]

Dang, with shipping it's over 20$ for a little spacer... I will first try to find it localy!!

 

[mimason]

Just use 2 normal spacers

 

[Wadl]

Yes, I found a 2mm spacer. So I use ir ans the 1mm spacer that came with the cassette and everything is fine!!

Thank you

 

[mimason]

Just so you know SRAM cassettes don't require a spacer on normal 10sp hub bodies so going to 11sp you should only need the additional spacer for the increase hub dimension.

 

[Wadl]

Just so you know SRAM cassettes don't require a spacer on normal 10sp hub bodies so going to 11sp you should only need the additional spacer for the increase hub dimension.

Well, from what I read everywhere, I need the 1.85mm + the 1mm spacer... and from my experience, if I just put the 2mm space (since I don't have the 1.85) there is a spacer missing.. so I need the 1mm too.

With that, everything works great !!