Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
471 Posts
When you tighten the hitch retainer bolt down it will pull it to one side and it will be snug. 3mm gap sound pretty big, but there is a bit of a gap I know, that's why that retainer pin is threaded.
+1. There's always a good bit of slop in the trailer hitch fit, but when you tighten down the hitch pin bolt it will be completely snug and rattle free.
 
1 - 1 of 1 Posts
Top