Road Bike, Cycling Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
10,161 Posts
info...

Take the whole thing apart, including removing the bearing seat in the frame (they pull out by hand) apply a thin layer of grease to all surfaces of the bearing seats and the bearings and reassemble.

Look down the page a bit for a discussion on proper headset adjustment. Most people have the bearings set too loose.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top