Road Bike, Cycling Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
313 Posts
if you can get the parts, i don't see any reason why not.

however, some 9000 wheels/hubs have different lacing configurations and spoke counts from the 7900 series wheels (e.g. C50's) so it's best to do some in depth research based on what wheels you have now and what hubs you plan to replace the current ones with.
 

·
Registered
Joined
·
1,038 Posts
It should only need a new freehub and new axle nuts and redish the wheel. As I understand, they would only have to move the shoulder on the freehub over 1.85 mm since their is already a 1mm spacer used on a 7900 rear. It wouldn't be much more difficult than converting Campy NR hubs from 5 -6 speed.
It must be much more difficult since that solution seems too easy.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top