Road Bike, Cycling Forums banner
1 - 12 of 12 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
Fam-

My master of industrial design group is working with a plastics manufacturer to make a case for a developmental carbon infused 3D printing material to be a value add in the cycling industry

This is a high profile sponsored project so we expect it to bounce around the blogsphere this Spring

Please pause for 5-10 minutes and complete the survey to help us find real world insights from real world riders

http://tinyurl.com/Project-rIDe
 

·
Registered
Joined
·
752 Posts
Done.

EEC
 

·
Registered
Joined
·
11,088 Posts
fwiw, the question that asks what problems are 'usually' encountered was confusing.

I don't 'usually' encounter any of those listed...occasionally, but not usually.
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #7 ·
Noted- Thanks for the thoughtful response :thumbsup:
fwiw, the question that asks what problems are 'usually' encountered was confusing.

I don't 'usually' encounter any of those listed...occasionally, but not usually.
 

·
Registered
Joined
·
4,965 Posts
I'm in. Good luck!!
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #12 ·
We're at 93 responses, thanks to those that contributed

We're letting it live for another few days, if you haven't taken the survey please consider doing so


Cheers :thumbsup:
 
1 - 12 of 12 Posts
Top