Road Bike, Cycling Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
257 Posts
Discussion Starter · #1 ·
I just picked up a Bontrager 10 to 11 speed conversion freehub for the three-pawl design used on 2010 RXL wheels.
The conversion freehub does not have the pawl assembly attached. It looks like that assembly can be removed from the 10-speed hub, but I cant figure out how to get it off.
Does anyone know how to do this?

Thanks
 

·
'brifter' is f'ing stupid
Joined
·
15,564 Posts
Put the end of the axle in an axle vise and smack the rim upwards. Hub will come right off the freehub. Be careful so you don't lose any pawls/springs. Push new one on while turning slowly counterclockwise and it'll pop right on.
 
1 - 2 of 2 Posts
Top