Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,601 Posts
You should be able to build with them like any other rim. Seating/spoke line correction can't be done properly with full tension anyway. The added stress isn't enough to break a rim. When at around 80% of final tension it's also a good idea to give a _light_ tap on the spoke heads with a small hammer and punch.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top