Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
299 Posts
Discussion Starter · #1 ·
Any tips?

Standard barrel adjusters riveted to the down tube, external cable routing. Gear cables buzz against the inside of the barrel adjuster threaded tube.

I have tried putting various plastic tubes up inside the adjuster threaded part, eg the polyethylene core from gear housing; part of a ballpoint pen ink tube.

I have also tried putting an MTB cable donut where the cable exits the adjuster and Super Gluing it in place.

Nothing really helps.

I think I need some soft rubber tube about 2 mm in diameter to put up there. Or..... ??

Thanks!
 
1 - 1 of 1 Posts
Top