Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
208 Posts
I recently set up a Super Record rear derailleur with a 9 speed cassette and found that the jockey wheel cage would contact the spokes when trying to shift in to the largest cog. I wound up removing a cog and shimming the cassette away from the spokes. I am using this with Campy friction shifters and it works well. I would imagine you could get the same results with a Nuovo Record derailleur, and you may have different results with different wheels/hubs. Mine is a 126mm Shimano 105 hub. Normally used with a 7 speed cassette - but the cassette I used is an Ultegra 10 speed that I had laying around. BTW, the largest cog is a 28t.
 
1 - 1 of 1 Posts
Top