Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
12,185 Posts
QQUIKM3 said:
This stuff has been covered ad nauseam in various discussions. For the Campy's UT setup, I say for performance no, for less maintenance perhaps.
And I will agree. The stock bearings that come with the UT crankset aren't sealed on both sides. That is the reason they get destroyed so easily. I destroyed my set of stock bearings in 2,500 miles, which was the maintenance interval for them. Since then, I have been using the Enduro ceramic bearings in my UT cranksets and haven't had a problem. I even swapped them out on brand new cranksets before I put them on the bike. So, from a maintenance standpoint, I would say the extra $20 is well worth it. From a performance standpoint, the extra $20 isn't worth it to me. So, I bought them for the ease of maintenance.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top