Road Bike, Cycling Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,846 Posts
I can't open the link, but there's lots of standardization in key points so transferring shouldn't present any major challenges.

Places to check,

Wheels, double check that your wheels have the same axle width as the frame, which is probably 130mm (check that too).

headset, check that your headset is compatible with the frame or budget for a replacement, odds are you have a 1-1/8" press -in headset, but the frame may require an integrated headset.

Bottom bracket, probably fine with a 68mm standard threaded BB, but double check what you have against the frames.

front derailleur, OK if both are braze-on, otherwise clamp size may not match.

Seatpost 27.2mm is the most common, but not assured, check yours against the new frames.

Lastly, check the overall geometry. Changes may require a new stem, so keep a reserve for that. Also budget for replacing all four cables and housings. Odds are that housing & cable lengths will be different, and anyway it doesn't make sense to put all the labor into used cables.

Good luck, but don't expect miracles in performance improvement, that requires replacing the most import part of the vehicle, the engine.
 

·
Registered
Joined
·
1,846 Posts
otakunorth said:
i did, i posted here just before you answered and i cant seem to delete this post
sorry
can a mod delete this?
also thanks for the info

ps: http://www.bikepedia.com/quickbike/BikeSpecs.aspx?Year=2006&Brand=Fuji&Model=Newest+1.0&Type=bike this link will work
Don't worry, there's no reason to delete it now. But in the future, consider allowing enough
time for people to respond before reposting in another section. That way all the answers will be together in one cohesive thread.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top