Road Bike, Cycling Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
118 Posts
Discussion Starter · #1 ·
I never cared about looks over function. I usually just use my toys without regard for how they look like or how I look like in them. I made an exception. I painted them myself!

From these:
Bicycle frame Blue Electric blue Azure Bicycle accessory


To these:
Bicycle frame Bicycle accessory Scale Carbon Balance


I can't wait to build them.
 

·
Registered
Joined
·
118 Posts
Discussion Starter · #3 · (Edited)
To prep the TI, I hand brushed it using Scotch-Brite 7447 pads, then use SEM etching primer. Base coats are black and white from Ppg. One of the bike has a gloss finish using Transtar Kwik Gloss Urethane top coat and the other bike has matte finish from UreKem.

Below are some more pics. Since I will keep these bikes forever, I had my name immortalized under the top coat :). Sorry for digitizing them in the pics.

Bicycle frame White Line Font Black


Bicycle frame Line Font Parallel Triangle


White Bicycle accessory Line Material property Cylinder


Font Azure Electric blue Parallel Stationery


The decal is under the top coat:
White Purple Violet Magenta Electric blue


This one is starting to get built up now:
Bicycle frame Bicycle accessory Font Bicycle Bicycle part
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top