Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

110 Posts
Discussion Starter · #1 ·
I just installed a set of Tektro 720's on my 'cross bike. I tightened the straddle cable carrier bolt, tightened up the straddle cable, and made sure things were centered via the spring adjusters.

I then tightened up the two 2.5mm allens to hold the straddle cable in position. the brakes work great. However, I am unable to unhook the straddle cable (there is not enough play in it) to release the brakes. I'm sure there is an easy fix.

Any ideas?


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.