Road Bike, Cycling Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter · #1 ·
I have an Atlanta and I want to put a carbon fork on it. Any suggestions or what offset I need, totally have no idea about the best way to go is. thanks
 

·
Los Barriles, BCS, Mexico
Joined
·
1,456 Posts
sacstateroad said:
I have an Atlanta and I want to put a carbon fork on it. Any suggestions or what offset I need, totally have no idea about the best way to go is. thanks
In the Serotta catalog the Atlanta was listed as using a fork with a rake of 43mm. What you need to pay attention to is fork span, a measurement from the center of the dropout to the bottom of the crown race. Different brands of carbon forks have different fork spans and could alter the effective head tube angle and effective fork rake and trail if the span is significantly longer or shorter than the original Serotta fork.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top