Road Bike, Cycling Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
120 Posts
Discussion Starter · #1 ·
I am installing Chorus 11 on a Merlin frame and in general using anti-seize where metal meets frame.
On the bottom bracket, Merlin generally suggests both teflon tape and anti-seize together. What would be the torque value for the cups?
Thanks in advance-
 

· classiquesklassieker
Joined
·
3,113 Posts
MerlinJude said:
I am installing Chorus 11 on a Merlin frame and in general using anti-seize where metal meets frame.
On the bottom bracket, Merlin generally suggests both teflon tape and anti-seize together. What would be the torque value for the cups?
Thanks in advance-
You can find all the manuals online here:

http://www.campagnolo.com/jsp/en/doc/doccatid_4.jsp

Download the "11s Ultra-Torque crankset instruction sheets - 02/09". If you are not using loctite, it recommends 35 N.m.

Have you checked that your BB dimensions are within the acceptable specs?

Good luck!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top