Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

· Every little counts...
Joined
·
3,924 Posts
This is a dual-pivot design?

There is a very small allen bolt that threads into the pivot to hold it in place. Located in the middle bridge. Sounds like this is loose or missing and that is why the centre bolt spins. This must be solidly in place.

If you have the new single-pivot design it looks like there is a locknut used to secure the pivot.

http://www.campagnolo.com/pdf/spares01-B.pdf
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top