Road Bike, Cycling Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5,263 Posts
Discussion Starter · #1 ·
I'm finding that my brake cable housings on my hybrid are excessively long, especailly when I see the brake setup on a road bike, But then before I try anything, does the brake design have anything to do with the length of the cable housings? Small details (if it matters) are that the brakes are Avid SD-7's routed to Avid 1.9SL levers.


I will admit that my desire for a change in cable housing setup is partially due to aesthetic reasons....and they're dangling about annoyingly when I'm on bumpy roads.

Another follow up question is if the brake design isn't a factor in housing length: any cheap, already "compact" housing sets? Or would it be a matter of cutting them?
 

·
Registered
Joined
·
5,263 Posts
Discussion Starter · #5 ·
Puchnuts said:
And a few photos would help immensely. We can't advise without a picture.
I've been trying but the uploader to this site keeps saying it's failing. So here's one via photobucket. The routing was setup "Moto" style (front brake on the right). Broth front and rear brake cable housings loop around pretty far.

...Although I was only talking about my brake cable housings, I can't help but notice the rear derailleur cable housing is pretty long as well.

https://s70.photobucket.com/albums/i119/F430Challenge/bike/?action=view&current=DSC01567.jpg

Stogaguy, thanks for the links, especially the parktool one. Now I know what to get when trimming the housings.

Stagehand, I've already got the brake tension pretty high since I like the feel of greater brake actuation resistence. I'm not so fond of using zip-ties but if cutting doesn't seem reasonable, I guess I'd do that. But yeah I'm understanding what you're saying in regards to whether or not I acutally should cut the housings. Brakes funciton well, but I'm just bothered by the slightly messy look of everything.
 
1 - 2 of 2 Posts
Top