Road Bike, Cycling Forums banner

Cleaning Look labels etc.

2780 Views 11 Replies 6 Participants Last post by  skyliner1004
I have a naked carbon 2001 KG281 with the gray Look labels.

I'd like to clean off what little dried grease etc. if possible. Is there a safe method of doing it without damaging the labels?

Also, is it necessary to put some type of treatment on the naked carbon for protection.

I have read where some riders apply something to the frame - I don't want to change the shade too much if possible.

Thanks in advance.
1 - 2 of 12 Posts
i have the goo gone spray gel. It'd be safe to use this on my carbon fiber frame to get off glue residue as long as i rinse well with water after?
i see, i'm not talking about removing the LOOK design stickers, i'm talking about the size sticker that are on most bikes on the seat tube, and other warning stickers around the bike.

anyway, i'll try with low heat blow dryer first, if that doesn't clean it well enough then i'll try a little goo gone (spray gel) then wash off with water.
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.