Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
604 Posts
At some point in the 240s life it went from a 10mm steel axle to the current 15mm aluminium axle. The old silver "Hugi" hubs were 10mm, and all the "s" version are 15mm, but I'm not 100% sure about some of the later black "Hugi 240" models.

Pull one of the endcaps off and measure the axle diameter - If it's 10mm then the part in the awbike link won't help. The endcaps are machined from solid bar so someone with a lathe would be able to modify your current endcap or machine a new one :thumbsup:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top