Road Bike, Cycling Forums banner

1 - 2 of 2 Posts

13 Posts
Discussion Starter #1 (Edited)
BRAND NEW-0 MILES-Edco Umbrial DB Carbon Fiber 12mm Thru Axle Disc 700c rims:
45mm full carbon- Clincher (Tubeless Ready)
Rim Width: 25.5mm (external), 17mm (internal)
Spokes: Front 20, Rear 24; DT Aerolite spokes, DT Pro Lock Aero black stainless steel.
Hubset: Edco Super G, black anodized, Shimano/SRAM 10/11
Weight: 1599g (front 740g, rear 859g)

Handmade Swiss rims, 45mm deep-rimmed carbon clincher wheelset. These were purchased as a kit with a new bike and have absolutely 0 miles-never ridden. They have brand new Velox rim strip installed.

Selling a full Ultegra hydro build kit with Deda Superzero bar and stem too. Photo attached.


13 Posts
Discussion Starter #2
Adding this on here in case the entire groupo is of interest too:
This is a complete build kit for a Shimano Ultegra Hydraulic disc road bike, brand new, 0 miles, no usage, taken off of a brand new frame. I use SRAM across two bikes, so just switching out the brand new Shimano hydraulic.


•700 C Edco carbon fiber clincher/tubeless ready disc wheels with 11 speed hub, 45mm carbon depth, handbuilt swiss wheels with Sapim X-ray aero spikes and DT Swiss Edco anodized black hubs.

•Deda super zero stem and bar, 42mm Short and shallow compact aero bar

•Deda super zero aero stem- 100mm

•Full Shimano Ultegra hydraulic build kit complete with rotors, cables, hoses, chain, cassette, crank set, front and rear derailures, and even bottom bracket.

•12-25 cassette

•172.5 crank arm length

•52-36 chainrings

•Shimano IceTec rotors -pair, 140mm

* hydraulic cables removed from previous frame so will require new mounting ends/lines depending on individual frame size.

I've been told the messaging through the forums here is finicky, so em. me direct at google for more details-jakecalderburby
1 - 2 of 2 Posts