Road Bike, Cycling Forums banner

FSA BB/Crankset play!

634 views 1 reply 2 participants last post by  Ken 
#1 ·
I've installed a new team edition FSA Crankset and FSA BB. I torqued To specification, but still have a bit of play when I rock the cranks perpendicular to the frame. Any suggestions? Could the BB spindle be bad out of the box? I hear an audible click when I sit in the saddle and spin in the middle ring. Not sure if it's the cranks or not. Help!
 
#2 ·
Bearings Probably

Billy Goat said:
I've installed a new team edition FSA Crankset and FSA BB. I torqued To specification, but still have a bit of play when I rock the cranks perpendicular to the frame. Any suggestions? Could the BB spindle be bad out of the box? I hear an audible click when I sit in the saddle and spin in the middle ring. Not sure if it's the cranks or not. Help!
Maybe the BB bearings weren't assembled to specs:confused: . This would cause the spindle to wobble.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top