Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

·
Forever a Student
Joined
·
4,963 Posts
I don't know for sure, don't have time to search around but I can offer some ideas.

First off I think you have a Sram GXP bottom bracket now. Your 105 crank should go in one side but not the other. One hole is 24mm the other is 22mm.

Secondly, I think that's a press-fit bottom bracket. Quite possibly the Shimano pressfit standard of BB-86. SM-BB-72-41B is the code number of the one you will probably end up buying to replace the one you have now so you can use your 105 crankset.

Third and last is that you REALLY should take it into a local bike shop to have them properly remove the bottom bracket there now and install a press-fit Shimano one for you.
 
1 - 1 of 1 Posts
Top