Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

· Riding towards Delmarva.
790 Posts
Discussion Starter · #1 ·
I've maintained my bikes for years, cut new cables, tuned up deraillers, etc.

But I've never built up a bare frame. My drivetrain parts are almost here and I'm specifically wondering about dialing in my front and rear deraillers. I'm Shimano 10sp double, 50/39, 12/27, Ultegra all around.

Any tips on how to pull cable to the front and rear deraillers and get them dialed in quickly? What gear to put the levers in, what gear to hold the deraillers in while attaching the cable, etc.?

I know how to set the front derailler's height and rotation, but I'm specifically thinking about what gear to put the levers in, and how to easily attach the cable where everything is closely matched right from the start.

Make sense? Any tips?
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.