Road Bike, Cycling Forums banner
1 - 2 of 2 Posts

· Registered
362 Posts
Discussion Starter · #2 ·
In case anyone else wants to know . . .

Pulled the seals off carefully by hand, and loosened the lock nuts and cones. The grease was still clean! Readjusted the cones. A lttle tricky reseating the seals; worked them in with my fingers on the edges until the axle/bearing assembly moved with a minimum of drag.

Piece of cake!
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.