Road Bike, Cycling Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
I've never been a huge fan of ISPs, but I picked up this 2010 Giant TCR Advanced Sl 2 with an Easton EA90 Wheelset and Full Dura Ace Components. It's a M/L and at $1300 I could not pass it up. Do you have any ideas on how to raise the ISP by about 2 inches after spacers have already been applied? I guess I could ship it to a carbon repair company but that will take some $$. Thanks for the help!
 

·
Registered
Joined
·
311 Posts
Thanks! How many spacers can I put on? Is 40mm worth too much?
You can only go as far as the minimum insertion mark in the clamp.
You'll have to fit it, and move it until you get the correct saddle height for you but without exceeding the minimum insertion mark (if you can't do that then it's a waste of time and money going any further).
Once you've done that test, you'll see how many spacers you need to order to 'fill the gap' which will then allow you actually ride the bike.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top