Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

· Registered
14,776 Posts
Recessed nuts are kind of the stardard now. The other kind requires a much longer bolt, and I don't know if anybody makes them that way anymore. Presumably you need if for an older fork? If it's a steel fork it's a pretty simple task to drill out the hole so it will accept the recessed nut. It doesn't have to be enlarged much, and can generally be done with no real harm to the fork.

Here's a good discussion in Sheldon's glossary (scroll down to "recessed brake mounting"):
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.