Road Bike, Cycling Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hey folks,

Just got some used wheels and when I install a new ultegra cassette on the hub I get a very slight fore/aft and rocking rotation of the cassette. I have used some small spacers but nothing takes it out completely, plus the spacing is a concern with these spacers.

The freehub splines look normal compared to another, so I'm at a loss.

Does mavic have a special spacer to use that I'm missing? This is my first mavic hub experience.

Thanks for any thoughts,

M
 

·
Registered
Joined
·
3,431 Posts
Mavic wheels come with a spacer that needs to be used with a non-mavic cassette.

If your cassette is 9 speed, only the mavic spacer is needed.

If you cassette is 10 speed, it should have come with a spacer. Both that spacer and the Mavic spacer are needed for the 10 speed cassette.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top