Road Bike, Cycling Forums banner
1 - 3 of 3 Posts

·
chamois creme addict
Joined
·
1,479 Posts
Discussion Starter · #1 ·
I have just swapped the Shimano freehub on my Ksyrium SSC rear wheel (FTS-L hub) to the Campy ED10 freehub body so I can use them on a Campy 10spd bike. I notice that Mavic provides a lockring for the cogs when the wheels are bought new. This lock ring was not provided, all I received was the freehub body. Can I use the Campy 11T lockring?
 

·
Registered
Joined
·
2,601 Posts
Yes. I even prefer it to the soft Mavic aluminum one. It doesn't have a shim like Shimano and gets chewed up pretty fast.
 

·
Registered
Joined
·
10,160 Posts
if your first cog is an 11..

Eric_H said:
I have just swapped the Shimano freehub on my Ksyrium SSC rear wheel (FTS-L hub) to the Campy ED10 freehub body so I can use them on a Campy 10spd bike. I notice that Mavic provides a lockring for the cogs when the wheels are bought new. This lock ring was not provided, all I received was the freehub body. Can I use the Campy 11T lockring?
I assume you are using an 11T first cog, if not, you need the 12-13T lockring.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top