Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter · #1 ·
In the past I have had 2 diferent sets of Mavic wheels, Ksyrium Sl's and R-Sys. Both had a hub that had an outboard sealed bearing in the cassette body but on the inboard side....a lage plastic? bushing that rode right on the aluminum of the hub. Mavic reccommended cleaning and re-lubeing of that bushing every 1000 km with mineral oil. I got pretty tired of that.

Is that still the way they are made or do they have a sealed inboard bearing set now?

Thanks
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top