Road Bike, Cycling Forums banner
1 - 5 of 5 Posts
G

·
Discussion Starter · #1 ·
I'm trying to put a new Dura Ace cassette on a new set of Velocity Spartacus wheels. When I put the cassette I seem to have some play. I even tried pulling my Ultegra cassette from my Dura Ace wheels and had the same issue. Am I missing a spacer that might be needed with the Velocity hubs? If so can I rob a spacer from my Ultegra cassette to make it work?
 

·
Registered
Joined
·
2,699 Posts
gnauss said:
I'm trying to put a new Dura Ace cassette on a new set of Velocity Spartacus wheels. When I put the cassette I seem to have some play. I even tried pulling my Ultegra cassette from my Dura Ace wheels and had the same issue. Am I missing a spacer that might be needed with the Velocity hubs? If so can I rob a spacer from my Ultegra cassette to make it work?
Is it a 10 speed cassette? If so there is a thin washer that you have to use on 9 speed freehubs to take up the slack.
 
G

·
Discussion Starter · #5 ·
My bad.

I figured it out. I neglected to take the thin spacer that was between my current hub and cassette and tranfer it to the new hub. Thanks for the feedback everyone!
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top