Road Bike, Cycling Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
168 Posts
how?

what was required to install this?
a. are the nokons running all the way through the bars?
b. did you have to enlarge the routing holes on the handlebars?
c. how did the effect or improve shifting?

thanks
 

·
Registered
Joined
·
105 Posts
elaugier said:
I fixed this detail
How many beers did that take?:D I did that with my old K-Sword bar. What a pain in the ass! I ended up wrapping the nokons in electrical tape and attaching a piece of derailleur cable to the end and pulling it all through leaving the electrical tape. I figured it would help keep the nokons from abrading the carbon plus it keeps them from rattling in there.

2wheelsport
 

·
wheel to wheel
Joined
·
2,236 Posts
electrical tape?

2wheelsport said:
...I ended up wrapping the nokons in electrical tape and attaching a piece of derailleur cable to the end and pulling it all through leaving the electrical tape. I figured it would help keep the nokons from abrading the carbon plus it keeps them from rattling in there.

2wheelsport
I use heat shrink tubing (only over the portion under the bar tape), to maintain tightness and help prevent any corrosion from sweat, etc. It works perfectly. It would definitely help in this application.
 

·
Banned
Joined
·
3,305 Posts
That bike is sick.
Congrats.
 
1 - 10 of 10 Posts
Top