Road Bike, Cycling Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
487 Posts
Discussion Starter · #1 ·
I have a Pinarello Marvel frame on the way and I need to get a few components to set it up with. (Building a race bike - replacing current Cannondale CAD3 Frame). Looking at the Gitabikes website, it looks like the frame is NOS from 05 or earlier. It has the red,white,and blue paint scheme with red sections in the center of the TT, ST, and HT

I've been googling for a while now and I can't find what size Seatpost the frame takes.

When I look at the pictures on gitabike here:
http://www.gitabike.com/cgi-bin/shop/pinarello_loadhome.cgi?user_id=id&file=pinarello.html

It appears to have a Pinarello Seatpost installed like this one:
http://www.competitivecyclist.com/r.../2009-pinarello-carbon-seapost-353.245.0.html

That seatpost is 31.0 mm. But it is not exactly like the one in the picture... The post in the gita pictures is a Pinarello post but has a red P logo, the one on competitive cyclist has a white P logo.

So -- what size do I need?
 

·
Registered
Joined
·
487 Posts
Discussion Starter · #2 ·
It is 31.0 mm.... (Checked with Tom at GVH)
 
1 - 2 of 2 Posts
Top