Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I built my wheels up with 100kgf spoke tension (open pro on chorus 32 hole hubs and ACI butted spokes) but when I recently checked the tension, it only measured 60kgf.

Thinking the spokes must have stretched, I've just put the wheel in my truing jig to re-tension the spokes and now that I've removed the tyre, the tension measures up around the 100kgf mark again.

So: should I aim to have the spokes tensioned correctly with the tyre inflated or leave the tension as it is? (Tyres are Hutchinson Fusion 2 tubeless inflated to 90psi)
 
1 - 1 of 1 Posts
Top