Road Bike, Cycling Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
130 Posts
Discussion Starter · #1 ·
Hi,
I'm bringin an old Trek road frame back to life. I measured the inside diameter @
1.080 inches on the nose. I know that 27.2mm = 1.070" Seems to me that .010" is alot
of area to squeeze to clamp down on. Gap slot looks ok. Are there/were there 27.3mm or 27.4mm seatposts made?

TIA,

Mr. Dan
 

·
Registered
Joined
·
591 Posts
MrDan said:
Hi,
I'm bringin an old Trek road frame back to life. I measured the inside diameter @
1.080 inches on the nose. I know that 27.2mm = 1.070" Seems to me that .010" is alot
of area to squeeze to clamp down on. Gap slot looks ok. Are there/were there 27.3mm or 27.4mm seatposts made?

TIA,

Mr. Dan
Dollars to donuts, it's a 27.2. My old Lugged steel Trek is, and so is the new 5200. Next size up is a 27.4
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top