[RoadBiker]

Hey guys,

I'm looking at my crank and it seems like the second chainring is too close to the first. I thought it was weird. This is suppose to be running an apex groupset (not sure if it matters) and wanted to know if there's like a specific chainring spacer sizing that would go perfect on it.

https://i.imgur.com/dxm9KCH.jpg
https://i.imgur.com/6mYjV1F.jpg

Thanks in advanced.

 

[victorscp]

hello friend
looks like the chainrings were installed incorrectly one ring should be on each side of the spider. i have sram apex and the spacing is not that close

 

[RoadBiker]

hello friend
looks like the chainrings were installed incorrectly one ring should be on each side of the spider. i have sram apex and the spacing is not that close

Ahh, I see. I just noticed now. I fixed it, thank you very much!

 

[cxwrench]

wow...you may want to enlist some experienced help before taking on any other mechanical stuff.

just to be safe.

 

[tihsepa]

wow...you may want to enlist some experienced help before taking on any other mechanical stuff.

just to be safe.

There is a first time for everything I guess.

 

[Kerry Irons]

There is a first time for everything I guess.

I used to say "Now I've seen everything!" but the Internet has taught me to keep quiet on that topic.

 

[RoadBiker]

wow...you may want to enlist some experienced help before taking on any other mechanical stuff.

just to be safe.

I'd say this went well.
https://i.imgur.com/WQPa7g1.jpg

But for any other bike components I have to install on my bike, I'm looking up tutorials.

 

[cxwrench]

there are tons of good ones on youtube by SRAMtech. they cover pretty much everything.

 

[RoadBiker]

there are tons of good ones on youtube by SRAMtech. they cover pretty much everything.

Will look into that, thank you very much.