Road Bike, Cycling Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
84 Posts
THe non-drive side will have a metal inner ring, ~5mm surrounded by the rubber seal, the inner surface is brass/rubber. The Drive side will appear to be all-rubber, again brass inner surface. You can check SRAMS website for the BB details, they usually place all of their install/parts infor there. Only thing to make sure you do is to firmly seat the outer seals into the cup
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top