Road Bike, Cycling Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey,
I was wondering how I could go about putting a sram red crank on my Cannondale caad4 from 2000. I currently have a TruVativ Touro triple crank with the power spline BB. I know that the BB on my C'Dale has a 68mm by something (I cant find the specs). Could someone guide me to a BB if possible? Also, I have an old 1 in diameter steel fork on the frame right now, and was wondering if I could run a 1 1/8" fork from a newer cannondale...any thoughts? I know the 2001 caad4 has a 1 1/8" but the 2000 caad4 has a 1"...so I'm not sure if this is possible.

Thanks for any help you give!
 

·
Registered
Joined
·
343 Posts
Crankset is easy, just get the GXP threaded BB version. No problem.

You're out of luck on the fork though, no way to put 1-1/8th in a 1" head tube, although there are some nice carbon forks still available in 1".
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top