Road Bike, Cycling Forums banner
1 - 3 of 3 Posts

·
Baltic Scum
Joined
·
1,828 Posts
Discussion Starter · #1 ·
Guys,
Having bought a (relatively) NOS Pinarello Montello/Super Record, I was wondering whether I need special tools to properly maintain my new joy. I have everything needed to service all current Campy components. Thoughts?
 

·
Registered
Joined
·
57 Posts
You will need:
2 X 32mm headset spanners
1 X BB lockring tool
1 X BB adj cup pin tool
1 X 15mm crankbolt wrench
1 X Campy crank extractor
Freewheel puller for your brand freewheel
Chain tool for 5/6/7 spd chain
Hub cone wrenches: 2 X 13/14 and a 15mm
Pedal dustcap wrench
15mm pedal wrench
8/9/10 mm box wrenches
4/5/6 mm allen wrenches

Have fun!
 

·
Registered
Joined
·
274 Posts
I definitely second the BB lockring tool! For years I tried greasing by using a Park lockring tool, and ruined several lockrings and scratched up a few frames before I finally decided to bite the bullet and buy the Campy lockring tool.

Overpriced? Sure. But now with a stable of vintage bikes,all with Campy BB's, it finally made economic sense to get the right tool for the job. It took awhile, but I finally got it through my thick skull.

Oh, and don't forget the 7mm allen wrench. Some of the older Campy, TTT stuff may require it. Best bet to find one is Sears.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top