Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

·
NeoRetroGrouch
Joined
·
6,491 Posts
The trick is in the hub...

The cassettes (Sh-9) are all spaced the same. If you get the distance from the outside of the lock nut to the first cog teeth the same, then you have the sames starting point. The simple way to do this is to use the same make/model of hubs on all your wheelsets. ( I stick with Shimano 6500.) The hard way is to measure them and start playing with 1mm axle spacers and redishing your wheels.

TF
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top