Road Bike, Cycling Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
10,160 Posts
the problem...

Even if the bolt hole behind the crankarm was on a 110mm BCD, there would remain the problem that other chainrings are not made to be bolted in from the back side and they aren't made withthe exact thickness to match up with the Campy crankarm.

If you need a replacement ring, you still need to buy a Campy-compatible model.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top