Road Bike, Cycling Forums banner
1 - 2 of 2 Posts

·
..............
Joined
·
791 Posts
Discussion Starter · #1 ·
I'm looking into getting a crown race setting tool, and wanted to see if any of you shop guys have a recommendation as to which tool to get.

Specifically, I'll be installing a Chris King 1 1/8" threadless headset. It looks like the Park tool model is about $60 with an additional $20 or so to buy the adapter that Chris King recommends. At $80, it's probably not worth it to me.

I've also seen the slide hammer type made by Bringheli, which sells for $17 for the cheapo model and $35 for the upper model which has a brass ring (I'm not sure what this brass ring is supposed to do, or why it is better).

Has anybody used one of these cheaper models, and can they safely be used on a King headset?

I'm not sure how much I want to spend, but I do seem to replace or swap out several headsets a year amongst my stable of bikes. I'm slowly upgrading them to King headsets, so I'm hoping the frequency of replacement goes down.

Any suggestions (other than just taking it to the LBS)
 

·
..............
Joined
·
791 Posts
Discussion Starter · #7 ·
[/QUOTE] Sorry, I know that was specifically what you didn't ask to hear, but I feel it's the best advice unless you are installing a bunch of headsets.
[/QUOTE]

Actually, I do plan on swapping out plenty of headsets. The one I will be installing will be the second one so far this year, and I can see one more on the horizon. Between commuting and training year round in Oregon, I probably do 6 rain rides a week during the winter months, so I tend to go through lots of headsets amongst the 8 bikes in the stable (the wife also rides in the rain). That, and I do bike maintenence for a lot of friends. I probably average 3 to 4 headset installs per year. I've had good luck so far with the one King headset I've, so I'm planning on swapping all my bikes over to King headsets as the old headsets die.

I'm hoping that I'll still be riding for at least three or four more decades, so yeah, I'll probably do lots of headsets.

I've done the homemade tool route, but sometimes the homemade route is more hassle than it is worth. And as you mention it can be risky. I'm trying to find a happy medium between the homemade tool route, and having to drop about $400 to get all of the proper headset tools (headset press, crown race setter, cup remover, crown race remover, star nut setter). I've got a homemade headset press that works sufficient, and can improvise the star nuts. The two areas I need to improve my system is setting the crown race and removing the cups. Since those are the cheapest tools, and the highest likelihood of damaging something on the homemade route, I figured I would start there.

The reason I don't go to the LBS is that it is a big hassle for me. All of the shops are on the opposite side of town. I commute every day by bike, and am either working or riding during the hours that the shops are open. Making an extra trip home to get the car (and the bike that needs the headset) then driving to the shop to get the work done would take me several hours. Time is money. If I take time off work, I don't get paid. Doing that once would pay for the tool right there. Either that, or it means I miss a Saturday ride, which is a big deal to me since I can't ride on Sunday.

Oh, and I don't drink beer, and I don't buy it for anyone else (can't stand the stuff for many reasons), so the bribe option is out. Besides, I really like working on my own bikes so I take no pleasure in having someone else do the work for me. I've only had a bike in to a shop once since maybe 1992, and that was to install a headset. It's a pride thing.

My real questions is which is the best tool to buy. Why spend $60 on a tool from Park, if someone else makes one that works just as well for 1/3 that cost.

Simple as that.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top