Road Bike, Cycling Forums banner
1 - 20 of 22 Posts

Weizilla

· Registered
Joined
·
20 Posts
Discussion starter · #1 ·
I just came back from my third bike ride (11 miles) and I feel like my bike posture is wrong. This is my first time riding a road bike so not only am I not used to the road bike position, but I don't even know what the proper position is.

One thing that I've noticed is that towards the end of my ride, my family jewels are not feeling comfortable. From my beginner experience, it seems like I can either keep a relatively straight back, lean from the hips but this puts pressure on my balls. Or I can keep my lower back more upright and bend at the waist but I'm not sure if this is the proper position. Right now, I sit with my butt bone on the back of the seat but I'm not sure if that makes a difference. I also feel like I'm leaning a little too far forward but that might just be because I'm not used to leaning forward.

What is the proper way of sitting on the seat without crushing your stuff?
 
I just came back from my third bike ride (11 miles) and I feel like my bike posture is wrong. This is my first time riding a road bike so not only am I not used to the road bike position, but I don't even know what the proper position is.

One thing that I've noticed is that towards the end of my ride, my family jewels are not feeling comfortable. From my beginner experience, it seems like I can either keep a relatively straight back, lean from the hips but this puts pressure on my balls. Or I can keep my lower back more upright and bend at the waist but I'm not sure if this is the proper position. Right now, I sit with my butt bone on the back of the seat but I'm not sure if that makes a difference. I also feel like I'm leaning a little too far forward but that might just be because I'm not used to leaning forward.

What is the proper way of sitting on the seat without crushing your stuff?
Sounds like you're trying too hard to get comfortable on your bike, but without seeing you on it and knowing more about the fit, I can't know why.

Properly fit, a riders sit bones are supposed to support rear weight, nothing forward of them. Also, IMO/E if you were too far forward, I think you'd experience arm/ hand discomfort, possibly along with back, neck and/ or shoulder pain.

If you've never been fitted, that's the place to start. If you have, consider returning to your LBS for adjustments. FWIW, I'd start by checking saddle tilt, then reach and bar drop.

Here's a pic of a good riding position:
View attachment 237923
 
Discussion starter · #4 ·
Sounds like you're trying too hard to get comfortable on your bike, but without seeing you on it and knowing more about the fit, I can't know why.

Properly fit, a riders sit bones are supposed to support rear weight, nothing forward of them. Also, IMO/E if you were too far forward, I think you'd experience arm/ hand discomfort, possibly along with back, neck and/ or shoulder pain.

If you've never been fitted, that's the place to start. If you have, consider returning to your LBS for adjustments. FWIW, I'd start by checking saddle tilt, then reach and bar drop.

Here's a pic of a good riding position:
View attachment 237923
Hmmm my arms do feel tired after a while. When you ride, how much of your weight should be supported by your arms vs butt? Should you be able to move your arms off the bar without shifting your weight or is it more 50/50?

Are you using bike bibs/shorts? They usually do a good of securing the said "jewels."
bibs. they secure them but i think it's more of my body pressing them into the seat then anything else.
 
Hmmm my arms do feel tired after a while. When you ride, how much of your weight should be supported by your arms vs butt? Should you be able to move your arms off the bar without shifting your weight or is it more 50/50?
I'd be more apt to attribute tired arms to acclimation (to road riding) than a fit issue, but keeping your upper torso relaxed, arms slightly bent, avoiding a death grip on the bars, using good quality gloves and changing hand positions should all help.

To answer your question, rider weight should be 55-60% rear, 40-45% front, and yes, using your core strength, you should be able to lift your hands from the bars.
 
Sometimes I think I've been riding so long that the 'fundamentals' are done without a thought, but if the OP's title is to be taken lterally (OUCH!), then I agree that Jean-Claude's 'fix' is in order.
 
Sometimes I think I've been riding so long that the 'fundamentals' are done without a thought,
Yes, I had to think about that one for a while as well. I mean, it takes some real doing to stuff your stuff down there where you can actually sit on it. Perhaps bike shorts or -bibs were being thought of in terms of one of those "athletic supporters" that are (were?) popular in the U.S.
 
Another thing to remember when you're starting out is that you need to remember to stand up once in a while and let the blood flow and to take the pressure off the boys for a while. Do that for a minute or two every 10 or 15 minutes and then as your tolerance builds you can adjust as able.

Don't just settle for the saddle that came on the bike either. It's normal to have to go through a few different seats to find one that fits you well. Unfortunately that costs money unless you have a VERY cool and generous bike shop in your area, but after a little trial and error you'll be glad to have invested a little more when you're cruising in comfort.
 
Some LBS's in my area have loner saddles that people can try for a while for a small fee and if they like it, they buy a new one, if not, they move on to the next loner saddle. Check around to see if there are some in your area with a similar policy.

Also, some websites (Nashbar comes to mind) have great return policies. You can order a few saddles, try them for a couple weeks at a time and then return the one’s that are no good, or return all of them and try other saddles. You will only be out the return shipping costs.
 
Hope you are just kidding....you don't want "cushy" on a road bike saddle. Firmer is better, within reason, but not "cushy". A seat cover is going to slide all over the saddle. Your bike shorts/bibs should provide all the padding needed.
 
Hmmm my arms do feel tired after a while. When you ride, how much of your weight should be supported by your arms vs butt?
Not much.

Stand on the balls of your feet with your heels against a wall, start to bend into a road-biking position, and notice how you fall over. Do the same in the middle of the room and note how your butt moves back to counter-balance your torso weight.

Proper fore/aft saddle location for a given handle bar position is necessary to keep weight off your hands.

Should you be able to move your arms off the bar without shifting your weight
Yes. Otherwise it'd be hard to drink and eat while riding.

bibs. they secure them but i think it's more of my body pressing them into the seat then anything else.
Saddles are adjustable for tilt, height, and fore/aft location although you may need a different shape.
 
Some LBS's in my area have loner saddles that people can try for a while for a small fee and if they like it, they buy a new one, if not, they move on to the next loner saddle. Check around to see if there are some in your area with a similar policy.

Also, some websites (Nashbar comes to mind) have great return policies. You can order a few saddles, try them for a couple weeks at a time and then return the one’s that are no good, or return all of them and try other saddles. You will only be out the return shipping costs.
After going numb in places I had never been before, I explained the problem to my LBS and they loaned me a Fizik Antares Versus, the one with the channel. Things went well but the saddle is $159, a quite substantial amount when weighed against my $700 bike! However after another ride on the Giant saddle that came with the bike, I think I'll have to bite the bullet.
Why couldn't I get into a cheap sport...dammit!
 
1 - 20 of 22 Posts