Could anyone please let me know what needs to be done to fit a Quarq Riken Powermeter GXP to a BMC TMR01 (pressfit BB) that is currently running Shimano cranks/BB? Is there an adapter to keep the current BB or if a new BB is required could anyone please let me know which one? There are no local bike shops near by so everything will be bought online.
Bottom bracket to fit GXP cranks to BMC TMR01?
Alwaysinjured
1 - 2 of 2 Posts
Joined
·
4 Posts
Could anyone please let me know what needs to be done to fit a Quarq Riken Powermeter GXP to a BMC TMR01 (pressfit BB) that is currently running Shimano cranks/BB? Is there an adapter to keep the current BB or if a new BB is required could anyone please let me know which one? There are no local bike shops near by so everything will be bought online.
Joined
·
16,359 Posts
You should be able to just get a GXP PF bottom bracket and install it and your Quarq. Main difference is the NDS which sleeves down from 24mm to 22mm and stops the axle in the proper position.
https://www.sram.com/truvativ/products/pressfit-gxp-bottom-bracket
https://www.sram.com/truvativ/products/pressfit-gxp-bottom-bracket
1 - 2 of 2 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
