[Rajvinder]

Hi all.. am restoring my Colnago Master Crono and have a pair of Campagnolo C Record cranks. However, which BB can i use? A square taper 102mm fits? Or only 111mm

Thanks all!

 

[Mackers]

111mm is the only game in town.

You'll push the crank arms against the cups on a 102mm axle.

 

[Rajvinder]

111mm is the only game in town.

You'll push the crank arms against the cups on a 102mm axle.

thank you sir! Cos am in Singapore..hard to find these..i may have to use some after market 111mm from Aliexpress

But is ok, wont be riding this baby much..is more a childhood project

Thanks!!!

 

[Mackers]

Sourcing an ISO taper ITA threaded bottom bracket on AE will not be easy.

 

[Rajvinder]

Sourcing an ISO taper ITA threaded bottom bracket on AE will not be easy.

Aaaaaarrrgh

 

[hfc]

Centaur 10 speed cartridge BB is 111 mm, might be a little easier to find.

 

[DrSmile]

Centaur 10 speed cartridge BB is 111 mm, might be a little easier to find.

Just an FYI the outside bearing on this doesn't have a seal, I routinely replace that bearing with a sealed one before install to avoid future problems.

 

[Rajvinder]

Centaur 10 speed cartridge BB is 111 mm, might be a little easier to find.

hi, yes you are right..this can still be found. thanks.. guess will try find this as it seems only 111m is best fit. thanks